Assembly video
 |
 |
Fitting tips: 1 - When adjusting door frame to suit your opening do not over tighten Allen keys. 2 - When fitting door frame make sure it is fitted square & plum (If the frame is not square and plum the shot bolts in the door could jam in the frame) 3 - Check the gap around the door and frame is equal 4 - When fitting the door furniture make sure the spindles are inserted correctly 5 - When fitting the handles do not over tighten the screws (This could jam the lock) |
|
 |
 |
||
|
Remove the door by lifting & put the frame in place Adjust frame to suit opening by tightening the 6 bolts with 12mm allen key Drill through centre of allen key bolts into blockwork with 10mm drill Use 6 anchor bolts to fix into place Place the door back on its hinges Fix the 2 screw connectors to the outside handle Insert the spring into the spindle drive followed by the large shaft (The outside handle is now complete) Fit the other spring and the smaller shaft to the inside handle Secure the inside handle with the 2 screws |
|||
Fax: +44 (0) 1260 295998
Email: sales@npm-sinoph.com
